Description

Kit is loosely based on a 1939 Martin D28

This is rear shifted braces 5/16 non scalloped. The top is red spruce with rosette installed thicknessed and brace location plotted for you. Braces are red spruce

Back and side is Honduran Mahogany bent trimmed and contoured for a D14 fret Martin body. All parts are included down to the strings. I did use a 28 style fret board and the fretboard and ebony bridge are set up with 1 3/4 nut width 2 1/4 spacing at the bridge.. Bone nut and saddle included.

Fretboard is slotted , tapered and radiused. the neck does have a valute

the back has the rosewood back strip and also thinned to spec and braces plotted.

there is a rosewood veneer included. Grove open back butter bean tuners are used.

pickguard is there

we do provide support as you build so if you get stuck we can help. We have numerous you tube vids.

this will make a great guitar..

Neck joint is dovetailed.