Weisenborn Bending pattern

$250.00

Category:

Description

this pattern is for a weisenborn lap steel guitar. There are  things you need to know , so please feel free to contact me with any questions you may have.

The bend pattern will require a 42 in set of slats , and a 42 in heat blanket.  We also have a bending set up for this.  Note that the pattern has 3 parts for the main pattern  the 2 outer parts and an inner. The steel tubes are more for support and there are 4 pieces for setting the spacing for the pattern pieces.

the caul for the  neck area uses two toggle clamps.   So like the regular bender  you do  lower bout , start the upper bout and set the neck caul then finish the waist to pull the slats and PRESS the sides on the pattern.

The holes are just a touch over sized to allow easy take down for storage as this pattern does take up a lot of real estate in the shop.

again thanks for your support .  There is also a matching mold for this .

Additional information

Weight 15 lbs
Dimensions 36 × 12 × 6 in